All Products
- Cooperated with FEV, German.
- Solid forged steel crankshaft, cylinder head made of alloy cast iron, small bulk, lightweight, less vibration, low noise, high reliability, overhaul interval is over 12000 hours.
- P-type high pressure, low fuel consumption, fuel seal of valve added, seal technology for piston ring and valve oil-sealing technique, low fuel consumption.
- Optional electronic governor pump
- Perfect G-drive for 100 - 128 KW generator sets
- Direct injection fuel system.
ENGINE
- Heavy-duty diesel engine.
- Vertical inline, four-stroke water-cooled.
- Direct injection fuel system.
- 12 VDC starter and charge alternator.
- Replaceable fuel filter, oil filter, and dry element air filter.
- Cooling radiator and fan.
- Industrial capacity exhaust silencer.
- Built-in vibration isolators.
- Closed crankcase ventilation system with a filter to eliminate engine room contamination.
ALTERNATOR
- Over-rated, brushless rotating exciter with solid-state AVR
- Class H winding insulations provide high-temperature resistance.
- The standard degree of protection IP21.
- Self-exciting and self-regulating.
- Factory impregnated epoxy varnished.
- Heavy-duty steel frame cast-iron cover.
- Stator grease insulation covered.
- Flywheel location cooling fan.
CONTROL SYSTEM
-
Designed integrated artificial intelligence with manual or automatic start and stop the generator.
-
Automatic shutdown on fault conditions.
-
Indicates service affecting faults.
-
Compatible with most standard ATS.
-
Plus, the individual analog shows for AC voltage, current load rating, frequency, and engine monitoring gauges.
-
Easy to replace with a plug-in type socket at the back of the control module.
-
With LED indicate the operation status and fault alarm condition of the Genset
- Cooperated with FEV, German.
- Solid crankshaft cylinder head made of alloy cast iron, sliding bearing, small bulk, lightweight, less vibration, low noise, high reliability, overhaul interval is over 12000 hours
- Necking combustion technique pump, 1-type high pressure, low inertia, injector with small-bore more complete combustion, low fuel consumption, oil seal of valve added, seal technology for piston ring and valve oil-sealing technique, low fuel consumption.
- Optional electronic governor pump
- Perfect G-drive for 40-80KW generator sets
- Direct injection fuel system.
- Innovative and compact design
- Robust handle for easy maneuverability
- Reduced weight and dimensions, easy-to-carry
- IP23 protection class and dust-proof electronic components.
- Precise and efficient Tig Arc striking by high frequency
- Automatic compensation for mains voltage within +15% -20%
- High performance on thin metal sheets
- Low energy consumption and high efficiency
- Heavy-duty diesel engine.
- Vertical inline, Four-stroke, water-cooled.
- Direct injection fuel system.
- 12 VDC starter and charge alternator.
- Replaceable fuel filter, oil filter, and dry element air filter.
- Cooling radiator and fan.
- Industrial capacity exhaust silencer.
- Built-in vibration isolators.
- Closed crankcase ventilation system with a filter to eliminate engine room contamination.
- Rational designing makes a power input KVA smaller. It saves the power expenses and the installation expenses as the capacity of the power transformer and power distribution can be smaller.
- H class coil insulation is highly resistant against heat and humidity and is highly durable.
- Austweld unique designed movable core and sliding mechanism are specially made to be strong against impact.
- It is so small in size and so light in weight that it is easy to be carried. It is suitable for small parts welding, tack welding, and outdoor welding
- Current can be regulated continuously, accurately, and minutely over a wide scope.
- The setting of the Amps conditions accurately such as 1A
- Excellent welding characteristics with any type of electrode
- Low energy consumption and high electrical efficiency
- Available welding processes: MMA – TIG
- All the data refer to 40ºC environment temperature as imposed by the standards
- Automatic compensation for mains voltage fluctuations within +15% -20%
- Possibility to work with adequate power generator sets
- Shockproof fiber compound main structure
- Control panel protected against accidental impact
- Reduced weight and size and easy-to-carry
- Automatic Hot Start to improve the arc striking with the most difficult electrodes
- Built-in Arc Force to automatically select the best welding arc dynamic characteristic
- Electrode Antisticking function
- The setting of the Amps conditions accurately such as 1A
- Excellent welding characteristics with any type of electrode
- Low energy consumption and high electrical efficiency
- Available welding processes: MMA – TIG
- All the data refer to 40ºC environment temperature as imposed by the standards
- Automatic compensation for mains voltage fluctuations within +15% -20%
- Possibility to work with adequate power generator sets
- Shockproof fiber compound main structure
- Control panel protected against accidental impact
- Reduced weight and size and easy-to-carry
- Automatic Hot Start to improve the arc striking with the most difficult electrodes
- Built-in Arc Force to automatically select the best welding arc dynamic characteristic
- Electrode Antisticking function
- The setting of the Amps conditions accurately such as 1A
- Excellent welding characteristics with any type of electrode
- Low energy consumption and high electrical efficiency
- Available welding processes: MMA – TIG
- All the data refer to 40ºC environment temperature as imposed by the standards
- Automatic compensation for mains voltage fluctuations within +15% -20%
- Possibility to work with adequate power generator sets
- Shockproof fiber compound main structure
- Control panel protected against accidental impact
- Reduced weight and size and easy-to-carry
- Automatic Hot Start to improve the arc striking with the most difficult electrodes
- Built-in Arc Force to automatically select the best welding arc dynamic characteristic
- Electrode Antisticking function
- The setting of the Amps conditions accurately such as 1A
- Excellent welding characteristics with any type of electrode
- Low energy consumption and high electrical efficiency
- Available welding processes: MMA – TIG
- All the data refer to 40ºC environment temperature as imposed by the standards
- Automatic compensation for mains voltage fluctuations within +15% -20%
- Possibility to work with adequate power generator sets
- Shockproof fiber compound main structure
- Control panel protected against accidental impact
- Reduced weight and size and easy-to-carry
- Automatic Hot Start to improve the arc striking with the most difficult electrodes
- Built-in Arc Force to automatically select the best welding arc dynamic characteristic
- Electrode Antisticking function
- Welding Rotator
- Manual Aligning Rotator
- Manual Adjust Welding Rotator
- Pressure Vessel Welding Turning Roller
- Welding Pipe Rotator
- Conventional Welding Rotator
- Welding Rotator Manufacturer
- Quality Auto Welding Equipment
- Adjustable Welding Rotator
- Welding Positioner
- Pipe Turning Rolls
- Turning Rolls / Welding Positioning Equipment
- Welding Tank Turning Rolls
- These welding partitions bays are made for metal. Suitable for the training center, industrial and workshop use.
- It is detachable to carrying assembles and dismantles.
- Panel (inner casing) made from 1.2mm perforated mild steel sheet.
- Panel (outside casing) made from 1.2mm mild steel sheet.
- Panel front casing 20mm x 1.2mm stainless steel pipe for welding curtain hook use.
- 50mm 40Kg/M3 Rockwool fiber can be inserted inside the frame wall to reduce noise.
- Stainless steel high-level adjustable stand.
- Digital Display parameters
- Excellent welding characteristics in MMA with any kind of electrodes, including cellulosic, and in TIG with “lift arc” striking
- Low energy consumption
- High reliability when used with generator sets
- Suitable to be used with mains cable lengths over 100m
- Automatic compensation for mains voltage fluctuations within ±20%
- Digital Ammeter with welding current presetting and Hold Function of the last read value
- Reduced weight and size, easy-to-carry
- Innovative and compact design
- IP23 protection class and “Tunnel” fan cooling system allow operation in the toughest work environments
- Adjustable HOT START to improve arc striking with the most difficult electrodes
- Adjustable WIDTH CURRENT to choose the best arc dynamic characteristics
- OPTIONAL-STAND BY function on the remote control
- WELDING GRNERATOR
- DIESEL ENGINE-DRIVEN WELDER
- DIESEL WELDING GENERATORS
- WELDING EQUIPMENT
- ENGINE-DRIVEN WELDER
- DIESEL GENERATORS
- GENERATOR WELDING MACHINE
- GENERATOR FOR WELDING
- BEST WELDER GENERATOR
- SINGLE WELDER GENERATOR
- TWO WELDER GENERATOR
- FOUR WELDER GENERATOR
- WELDING GRNERATOR
- DIESEL ENGINE-DRIVEN WELDER
- DIESEL WELDING GENERATORS
- WELDING EQUIPMENT
- ENGINE-DRIVEN WELDER
- DIESEL GENERATORS
- GENERATOR WELDING MACHINE
- GENERATOR FOR WELDING
- BEST WELDER GENERATOR